Thank you for your car Sticker purchase.
Your Sticker should be applied as soon as possible to prevent application issues.
Car Stickers should be applied only to surfaces with temperatures between 50 to 90 degrees Fahrenheit and should be allowed to cure for 24 hours before getting wet.
Your Sticker comes with transfer tape applied to help you easily install it.
You will need a Vinyl applicator or old credit card
Step 1) Clean the surface where you will apply the Sticker with rubbing alcohol and a cotton ball. Allow it
Step 2) Beginning in a corner, peel the backing paper off of the transfer tape.
Step 3) Place one side of the transfer tape onto the surface, and press it down with the vinyl applicator.
Step 4) Continue applying the Sticker in a rolling motion using the vinyl applicator to press it down as you go.
Step 5) Once the Sticker is placed, use the vinyl applicator and rub it firmly from the center point to theedges in all directions to remove air bubbles.
Step 6) Beginning in a corner, slowly peel away the transfer tape at a 45 degree angle. Enjoy your Sticker !